Electronic ballast SunPro CMH315W, 230V, IEC connector

The special SunPro CMH315W ballast is designed exclusively for CMH discharge lamps .

The advantage of ceramic metalhalide technology is a higher PAR/Watt ratio than with classic MH lamps and greater light production for photosynthesis per unit of energy. CMH provides the most suitable light conditions for the growth phase .

If you turn off the light, it is necessary to let the discharge lamp cool down completely before turning it on again.

Advantages of SunPro Digital CMH 315W:

- high efficiency

- dimmable device for CMH lamps

- short circuit/shock fault/thermal protection

- designed with an internal microprocessor

- own protection extends service life

Technical data Complete Fixture 315 CMH

• Maximum power: 330W
• Voltage: 240V
• Frequency: 50-60Hz
• Dopa Startup: 3-5 s
• Temperature during use: -25°C – +45°C
• Humidity during use: 0-90% RH
• Weight: 1.9 kg
• Dimensions: 229x155x60mm

Do not use the ballast until you have read and fully understood the instructions. The starting voltage of the ballast is a maximum of 4500 Volts; it could be dangerous for people nearby equipped. When operating the ballast, be aware of hazards and do not touch any electrical objects.