600W Lucalox

Combined, growth and flowering lamps 600W for growing plants under artificial lighting. The best lamps on the market GIB, Lumatek, SunPro, SunMaster, Osram, Philips, Elektrox.

Optimal lighting for 1m square.

600W growth and flowering lamps are suitable for growing plants on 1-1.2 square meters. Their light output is usually several tens to hundreds of thousands of lumens, the PAR value is also higher. Higher values are offered by HPS flowering lamps. Perfect lighting of plants in artificial conditions is not impossible.

Flower discharge lamps 600W

Lighting labeled as HPS (high pressure sodium) is a 600W high pressure sodium lamp that has a higher proportion of red-yellow light. This part of the light spectrum is generally more suitable for plants in the flowering phase, as it promotes the development of abundant inflorescences.

Growshop.cz offers 600W GIB Lighting flower lamps, HPS 600W Philips, HPS 600W Sylvania, HPS 600W SunPro, HPS 600W SunMaster, HPS 600W Elektrox, HPS 600W Lumatek.

Combined and growth lamps 600W

600W MH metal halide lamps with a higher proportion of blue-white light contribute to stronger and faster growth of the green parts of the plant, stems or leaves. They are more suitable for the growth period.

Growshop.cz offers the best growth lamps 600W GIB Lighting, MH 600W Philips, MH 600W Osram, MH 600W Sylvania, MH 600W SunPro, MH 600W SunMaster, MH 600W Elektrox.

Optimal light service throughout the plant's development is provided by combined sodium discharge lamps with a high proportion of red-yellow and an enhanced proportion of blue-white light spectrum.

Important parameters of discharge lamps - how to choose a discharge lamp?

Less experienced growers under artificial lighting usually decide on the purchase of a discharge lamp based on the luminous flux (lm), or on the color temperature (K), or on the service life or price. However, the most important parameter for successful plant cultivation is the PAR value. PAR is photosynthetically active radiation, which shows the amount of light that can actually be used for photosynthesis per second.

• Wattage - Is the energy output of the discharge lamp (Watt)

• PAR - Shows the value of photosynthetically active radiation, the amount of emitted light usable for photosynthesis per second (micromol/s).

• Luminous flux – Amount of light emitted (Lumen).

• Type of light – Compared to other types of lighting, discharge lamps are the most powerful and efficient.

• Light spectrum – Red-yellow for flowering, blue-white for growth, combined for growth and flowering.

• Color temperature - The more Kelvin, the more white to blue the light is and the more suitable for the growth period.

• Lifespan – minimum lamp life

• Dimmability – Electronic ballasts can only regulate the output of dedicated, dimmable discharge lamps.

The data for discharge lamps is based on the manufacturers' documentation. Some manufacturers do not list all important parameters.

How to use 600W discharge lamps correctly?

Use only 600W compatible ballasts and sockets. Always allow the lamp to warm up for a few minutes. After it goes out, let it rest for a few minutes before lighting it again.

600W lamps emit heat in addition to light, so make sure you keep the correct distance from the tops of the plants so they don't get burned. Never touch the glass of the lamps with a wet hand, use gloves or a cloth. Moisture on the glass can cause damage after the lamp is turned on. Never look directly into the light of the lamp, you can damage your eyesight. The lamp is very fragile, always handle it with great care. Do not use damaged lamps.

Do not touch the glass of the lamp during operation or immediately after switching off. Do not throw used lamps in the general waste, but use special containers.